Loading…
Type: Presentation clear filter
Tuesday, July 22
 

9:15am PDT

BoD Presentation LIMITED
Tuesday July 22, 2025 9:15am - 9:30am PDT
Paradise Ballroom A, B, C
BoD Presentation

Speakers
avatar for Joe Sabol

Joe Sabol

CHAIR, CMS BOARD
Director of ship fitting, welding, and metrology at Newport News Shipbuilding (NNS), Joe Sabol has 39 years of experience in optical and 3D industrial measurement in the land surveying, shipbuilding, and commercial nuclear environment. He has been instrumental in developing and initiating... Read More →
Tuesday July 22, 2025 9:15am - 9:30am PDT
Paradise Ballroom A, B, C
  Presentation

9:30am PDT

Orchestrating Coordinate Measuring Machine (CMM) Strategies for Precision and Efficiency LIMITED
Tuesday July 22, 2025 9:30am - 10:00am PDT
Paradise Ballroom A, B, C
"Orchestrating Coordinate Measuring Machine (CMM) Strategies for Precision and Efficiency"

Speakers
avatar for Donnie Brown

Donnie Brown

Owner/Programmer, Data Point Metrology
Donald (Donnie) D. BrownCertified CMS Level 2 Metrologist | AUKOM Metrologist | First Class Toolmaker | CMS Certification Committee Member Data Point Metrology (2024–Present)Owner / MetrologistProviding metrology consulting and CMM programming services with a focus on enhancing... Read More →
Tuesday July 22, 2025 9:30am - 10:00am PDT
Paradise Ballroom A, B, C
  Presentation

10:15am PDT

Spifi (Spirit Feature Inspection System) LIMITED
Tuesday July 22, 2025 10:15am - 10:45am PDT
Paradise Ballroom A, B, C
"Spifi (Spirit Feature Inspection System)"
Mark Davis Haynes
Speakers
MD

Mark Davis Haynes

As a part of Spirit’s Future Factory Technologies group, Mark Haynes and the team seek to identify cutting edge technologies for aerospace quality control and industrialize them into the Spirit Production System. Working closely with industry partners and universities, the teams... Read More →
Tuesday July 22, 2025 10:15am - 10:45am PDT
Paradise Ballroom A, B, C
  Presentation

10:45am PDT

Mirrored Surface Use and Measurement in Spacecraft Assembly and Test LIMITED
Tuesday July 22, 2025 10:45am - 11:15am PDT
Paradise Ballroom A, B, C
"Mirrored Surface Use and Measurement in Spacecraft Assembly and Test"
Robert Elliot
Speakers
avatar for Bob Elliott

Bob Elliott

Executive Committee Vice Chair, Lockheed Martin
Bob Elliott is a Lockheed Martin Fellow specializing in metrology and alignments. He has nearly 30 years of experience in the use of portable metrology equipment, systems engineering and spacecraft testing. Bob is a member of the Lockheed Martin Precision Alignment Lab in Sunnyvale... Read More →
Tuesday July 22, 2025 10:45am - 11:15am PDT
Paradise Ballroom A, B, C
  Presentation

11:15am PDT

Performance Evaluation of an Automated Laser Tracker Alignment System for the Vera C. Rubin Observatory LIMITED
Tuesday July 22, 2025 11:15am - 11:45pm PDT
Paradise Ballroom A, B, C
"Performance Evaluation of an Automated Laser Tracker Alignment System for the Vera C. Rubin Observatory"
Guillem Megias I Homar
Speakers
avatar for Guillem Megias Homar

Guillem Megias Homar

Stanford University
Guillem Megias Homar is an astronomer and engineer at Stanford University whose work bridges cutting-edge optics and fundamental questions in astrophysics, with a particular focus on active optics systems for next-generation telescopes. He is currently co-leading the commissioning... Read More →
Tuesday July 22, 2025 11:15am - 11:45pm PDT
Paradise Ballroom A, B, C
  Presentation

11:45am PDT

Metric potential of surface normal measurements from a low-cost camera. Work in progress and future potential LIMITED
Tuesday July 22, 2025 11:45am - 12:15pm PDT
Paradise Ballroom A, B, C
"Metric potential of surface normal measurements from a low-cost camera. Work in progress and future potential"
Stuart Robson
Speakers
avatar for Stuart Robson

Stuart Robson

Professor, University College London / Airbus
Professor Stuart Robson is the Royal Academy of Engineering / Airbus Chair in Large Volume Metrology. Based in the Department of Civil, Environmental and Geomatic Engineering at University College London, his academic research develops and validates image sensors and sensor networks... Read More →
Tuesday July 22, 2025 11:45am - 12:15pm PDT
Paradise Ballroom A, B, C
  Presentation
 
Wednesday, July 23
 

8:30am PDT

Trust but Verify: The Unexpected Benefits of Customer Calibration Programs to the PCMM Community. LIMITED
Wednesday July 23, 2025 8:30am - 9:00am PDT
Paradise Ballroom A, B, C
"Trust but Verify: The Unexpected Benefits of Customer Calibration Programs to the pCMM Community."
Glenn Richard Rees
Speakers
GR

Glenn Richard Rees

Mission Support Inc.
Glenn Richard Rees is the Quality Assurance Analyst for Mission Support Inc. in Clearfield, Utah. In this role, he was responsible for the development and implementation of the PCMM Arm Calibration Program which evaluates the performance of dozens of arms to the ASME B89.4.22-2004... Read More →
Wednesday July 23, 2025 8:30am - 9:00am PDT
Paradise Ballroom A, B, C
  Presentation

9:00am PDT

A Comparative Study of Measurement Capabilities of Two Large-space Measurement Systems: iGPS and OptiTrack LIMITED
Wednesday July 23, 2025 9:00am - 9:30am PDT
Paradise Ballroom A, B, C
"A Comparative Study of Measurement Capabilities of Two Large-space Measurement Systems: iGPS and OptiTrack"
Rui Han
Speakers
avatar for Rui Han

Rui Han

Rui Han, 26 years old, is currently a PhD student jointly trained by the Chinese Academy of Sciences and the Fraunhofer Society in Germany, and is also currently an assistant researcher at the Fraunhofer Institute for Factory Operation and Automation IFF.His main research interest... Read More →
Wednesday July 23, 2025 9:00am - 9:30am PDT
Paradise Ballroom A, B, C
  Presentation

9:30am PDT

Data Fusion of Point Clouds from Multiple Measuring Instruments LIMITED
Wednesday July 23, 2025 9:30am - 10:00am PDT
Paradise Ballroom A, B, C
"Data Fusion of Point Clouds from Multiple Measuring Instruments"
Rilyn Fox
Speakers
RF

Rilyn Fox

The University of North Carolina at Charlotte
Rilyn Fox earned his Bachelor of Science in Mechanical Engineering from the University of Minnesota – Twin Cities in 2022. Later that year, he joined the Center for Precision Metrology at the University of North Carolina – Charlotte to pursue his Ph.D. in Mechanical Engineering... Read More →
Wednesday July 23, 2025 9:30am - 10:00am PDT
Paradise Ballroom A, B, C
  Presentation

10:15am PDT

Speed or Precision? Solving the existential question of how to accelerate throughput without sacrificing quality LIMITED
Wednesday July 23, 2025 10:15am - 10:45am PDT
Paradise Ballroom A, B, C
"Speed or Precision? Solving the existential question of how to accelerate throughput without sacrificing quality"
Emily Elizabeth
Speakers
avatar for Emily Elizabeth

Emily Elizabeth

Managing Director, U.S., MTL Precision
As Managing Director, U.S. for MTL Precision, Emily Elizabeth is responsible for customer experience of the organization’s U.S.-based customers – a role that often involves creative thinking to solve the challenges that come with inspecting unique geometries. Prior to joining... Read More →
Wednesday July 23, 2025 10:15am - 10:45am PDT
Paradise Ballroom A, B, C
  Presentation

10:45am PDT

CMM Calibration Navigation LIMITED
Wednesday July 23, 2025 10:45am - 11:15am PDT
Paradise Ballroom A, B, C
"CMM Calibration Navigation"
Rich Dittman
Speakers
avatar for Rich Dittman

Rich Dittman

Sr Inspection Technology Engineer, GE Aerospace
I began my career in the US Army as a 21L (Pershing Electronic Repairman), where I gained specialized skills in repairing nuclear missiles. This role provided me with a strong foundation in electronics and precision repair techniques. After my military service, I transitioned to GE... Read More →
Wednesday July 23, 2025 10:45am - 11:15am PDT
Paradise Ballroom A, B, C
  Presentation

11:15am PDT

Digital Calibration Certificates and QIF, the Quality Information Framework LIMITED
Wednesday July 23, 2025 11:15am - 11:45pm PDT
Paradise Ballroom A, B, C
"Digital Calibration Certificates and QIF, the Quality Information Framework"
Jacob Brooks
Speakers
avatar for Jacob Brooks

Jacob Brooks

The University of North Carolina at Charlotte
Jacob Brooks is a PhD candidate at the University of North Carolina at Charlotte’s Center for Precision Metrology, advised by Dr. Edward Morse. His research focuses on the interoperability of digital metrology information.
Wednesday July 23, 2025 11:15am - 11:45pm PDT
Paradise Ballroom A, B, C
  Presentation

11:45am PDT

Numerical Balancing: Revolutionizing Metrology with Numerical Certainty and Accurate Autonomous Data Evaluation LIMITED
Wednesday July 23, 2025 11:45am - 12:15pm PDT
Paradise Ballroom A, B, C
"Numerical Balancing: Revolutionizing Metrology with Numerical Certainty and Accurate Autonomous Data Evaluation"
Ingobert Schmadel
Speakers
avatar for Ingobert Schmadel

Ingobert Schmadel

He started his professional career at GSi in Darmstadt, Germany , where he became the Head of Survey and Alignment for the Heavy Ion Accelerator Facility at the age of twenty-six. After successful launch of the Heavy Ion Synchrotron and Experimental Storage Ring, he founded the... Read More →
Wednesday July 23, 2025 11:45am - 12:15pm PDT
Paradise Ballroom A, B, C
  Presentation
 
Thursday, July 24
 

8:30am PDT

Machine Learning Approach for Improving Data Accuracy of At-Line Automotive Measurements LIMITED
Thursday July 24, 2025 8:30am - 9:00am PDT
Paradise Ballroom A, B, C
"Machine Learning Approach for Improving Data Accuracy of At-Line Automotive Measurements"
Matt Cornelius
Curtis Tingle
Speakers
avatar for Matt Cornelius

Matt Cornelius

Metrology Automation Analys, BMW
Matt Cornelius is a Metrology Automation Analyst at BMW Plant Spartanburg in South Carolina.  He works on high-volume data acquisition systems and develops innovative, data-driven systems for monitoring, predicting, and controlling body manufacturing processes.  He focuses on projects... Read More →
avatar for Curtis Tingle

Curtis Tingle

Body Shop Metrology & Dimensional Quality Section Manager, BMW
Curtis Tingle is the Body Shop Metrology & Dimensional Quality Section Manager at BMW Plant Spartanburg in South Carolina.  He leads a team of metrology engineers, dimensional engineers, and software developers to achieve body shop dimensional quality targets through process control... Read More →
Thursday July 24, 2025 8:30am - 9:00am PDT
Paradise Ballroom A, B, C
  Presentation

9:00am PDT

Laser Tracker Direct Scanning of Vacant SMR Target Holders for Alternative Alignment LIMITED
Thursday July 24, 2025 9:00am - 9:30am PDT
Paradise Ballroom A, B, C
"Laser Tracker Direct Scanning of Vacant SMR Target Holders for Alternative Alignment"
Steven Seiler
Speakers
SS

Steve Seiler

Engineer, Hexagon Manufacturing Intelligence
Steve is an Engineer with Hexagon Manufacturing Intelligence specializing in portable metrology automation solutions.  His career is focused on helping metrology users efficiently achieve repeatable inspection results, accurate alignments, and improved production outcomes in industries... Read More →
Thursday July 24, 2025 9:00am - 9:30am PDT
Paradise Ballroom A, B, C
  Presentation

9:30am PDT

Stability Assessment of Motion Capture Systems for Manufacturing Applications LIMITED
Thursday July 24, 2025 9:30am - 10:00am PDT
Paradise Ballroom A, B, C
"Stability Assessment of Motion Capture Systems for Manufacturing Applications"
Jorian Khan
Speakers
JK

Jorian Khan

University of North Carolina at Charlotte
Jorian Khan is a PhD student in Mechanical Engineering at the University of North Carolina at Charlotte, working within the Center for Precision Metrology. His research focuses on instrument testing and assessment, with an emphasis on improving the accuracy and reliability of multi-sensor... Read More →
Thursday July 24, 2025 9:30am - 10:00am PDT
Paradise Ballroom A, B, C
  Presentation

10:15am PDT

Metrology Applications of Industrial X-Ray Computed Tomography (CT) in Medical Device Manufacturing LIMITED
Thursday July 24, 2025 10:15am - 10:45am PDT
Paradise Ballroom A, B, C
"Metrology Applications of Industrial X-Ray Computed Tomography (CT) in Medical Device Manufacturing"
Krishnakumar Gopal
Tony Calduch
Speakers
TC
avatar for Krishnakumar Gopal

Krishnakumar Gopal

Manager of Calibration and Metrology, Arthrex
Krishnakumar Gopal is currently the Manager of Calibration and Metrology at Arthrex with over 20 years of experience in calibration and metrology. He has a Master of Science in Mechanical Engineering from UNC Charlotte, specializing in Metrology. He has worked in the medical device... Read More →
Thursday July 24, 2025 10:15am - 10:45am PDT
Paradise Ballroom A, B, C
  Presentation

10:45am PDT

User-centered training for optical measurements in digitalized manufacturing processes LIMITED
Thursday July 24, 2025 10:45am - 11:15am PDT
Paradise Ballroom A, B, C
"User-centered training for optical measurements in digitalized manufacturing processes"
Wiktor Harmatys
Speakers
avatar for Wiktor Harmatys

Wiktor Harmatys

Cracow University of Technology
PhD. Eng. Wiktor Harmatys, Cracow University of TechnologyBorn in 1988 in Cracow, Poland. He finished his studies at Cracow University of Technology in 2013 (Master studies in the field of Production Engineering ). In 2022 he was awarded a PhD with distinction at Faculty of Mechanical... Read More →
Thursday July 24, 2025 10:45am - 11:15am PDT
Paradise Ballroom A, B, C
  Presentation

11:15am PDT

Advanced MBE methods that inform Bidirectional Communication between Manufacturing and Quality Disciplines LIMITED
Thursday July 24, 2025 11:15am - 11:45am PDT
Paradise Ballroom A, B, C
"Advanced MBE methods that inform Bidirectional Communication between Manufacturing and Quality Disciplines"
Tom Groff
Speakers
avatar for Tom Groff

Tom Groff

President, Kotem
Tom is the President of Kotem and also holds the position of VP – Enterprise Products for OGP/QVI.  Kotem has software products to support the full MBE workflow with emphasis on GD&T. OGP offers a full line of metrology hardware products. Tom holds degrees in Aerospace Engineering... Read More →
Thursday July 24, 2025 11:15am - 11:45am PDT
Paradise Ballroom A, B, C
  Presentation

11:45am PDT

An Alternative Approach to Align Spacecraft to RF Test System Reference Axis LIMITED
Thursday July 24, 2025 11:45am - 12:15pm PDT
Paradise Ballroom A, B, C
"An Alternative Approach to Align Spacecraft to RF Test System Reference Axis"
Ahmet Akgul
Speakers
avatar for Ahmet Akgul

Ahmet Akgul

Design Engineer, Turkish Aerospace
Mechanical EngineerDesign Engineer at Turkish AerospaceSpace Systems AIT Ground Support Equipment5 years experience on several national and international Space Systems Projects 
Thursday July 24, 2025 11:45am - 12:15pm PDT
Paradise Ballroom A, B, C
  Presentation
 
Need help? View Support Guides
Event questions? Contact Event Planner
Powered by Sched Event Planning App
©2025 Sched • About • Privacy • Terms
Share Modal

Share this link via

Or copy link

Filter sessions
Apply filters to sessions.
Monday, July 21
Tuesday, July 22
Wednesday, July 23
Thursday, July 24
Friday, July 25
Education Zone
Emerald C
Grand Ballroom 1-3
Grand Ballroom 4-7
Hubbs Metrology Booth 306 in the Exhibit Hall
Measurement Zone
Paradise Ballroom A, B, C
Paradise E
Paradise Terrace
TBA
Treasures AB
Treasures CD
  • Exhibit Hall
  • General Sessions
  • Invitation Only
  • Meals / Breaks / Receptions
  • Measurement / Education Zone
  • Presentation
  • Training
  • Popular