Loading…
Monday, July 21
 

7:00am EDT

Boeing Only Meeting
Monday July 21, 2025 7:00am - 5:00pm EDT
Paradise D
This meeting is for Boeing only personnel that allows Boeing personnel attending the CMSC to meet with each other and discuss topics of interest internal to Boeing.

Monday July 21, 2025 7:00am - 5:00pm EDT
Paradise D
  Invitation Only

9:00am EDT

Registration / Check-In for Exhibitors & Speakers
Monday July 21, 2025 9:00am - 4:00pm EDT
Monday July 21, 2025 9:00am - 4:00pm EDT
  Exhibit Hall

10:00am EDT

Exhibit Hall Open for Setup
Monday July 21, 2025 10:00am - 10:00pm EDT
Grand Ballroom 4-7
​Conference Center Exhibitor Order Form ​​​
Monday July 21, 2025 10:00am - 10:00pm EDT
Grand Ballroom 4-7
  Exhibit Hall

12:00pm EDT

Registration / Check-In for Attendees
Monday July 21, 2025 12:00pm - 4:00pm EDT
Monday July 21, 2025 12:00pm - 4:00pm EDT
  Exhibit Hall

5:30pm EDT

New Attendee Orientation
Monday July 21, 2025 5:30pm - 6:15pm EDT
Paradise D
New Attendee Orientation with CMSC Chair Keith Bevan
CMSC Committee
avatar for Justin Novak

Justin Novak

Executive Committee Chair, Newport News Shipbuilding
Justin Novak is a Supervisor at Newport News Shipbuilding, where he has been active in the Metrology field for 14 years. He graduated from the NNS Apprentice School in 2008, earning the Charles F Bailey Award for academic excellence, and received an Associate’s Degree in Mechanical... Read More →
Monday July 21, 2025 5:30pm - 6:15pm EDT
Paradise D
  General Sessions

6:30pm EDT

CMSC Ice Breaker
Monday July 21, 2025 6:30pm - 8:30pm EDT
CMSC IceBreaker Sponsored by Metrology Works & CMS 
CMSC Committee
avatar for Coordinate Metrology Society

Coordinate Metrology Society

Coordinate Metrology Society
2025 Exhibitors
avatar for MetrologyWorks

MetrologyWorks

MetrologyWorks specializes in all things related to portable CMMs including portable arms and laser trackers. Whether you are looking for replacement probes, mounts or accessories for your portable arm, or SMRs, stands, and tooling for your laser tracker, we are the premier source... Read More →

Monday July 21, 2025 6:30pm - 8:30pm EDT
  Meals / Breaks / Receptions
 
Tuesday, July 22
 

6:30am EDT

Breakfast
Tuesday July 22, 2025 6:30am - 8:30am EDT
Hotel Lobby Area
Tuesday July 22, 2025 6:30am - 8:30am EDT
Hotel Lobby Area
  Meals / Breaks / Receptions

8:00am EDT

Opening Address
Tuesday July 22, 2025 8:00am - 8:30am EDT
Paradise Ballroom A, B, C
CMSC Committee
avatar for Justin Novak

Justin Novak

Executive Committee Chair, Newport News Shipbuilding
Justin Novak is a Supervisor at Newport News Shipbuilding, where he has been active in the Metrology field for 14 years. He graduated from the NNS Apprentice School in 2008, earning the Charles F Bailey Award for academic excellence, and received an Associate’s Degree in Mechanical... Read More →
Tuesday July 22, 2025 8:00am - 8:30am EDT
Paradise Ballroom A, B, C
  General Sessions

8:00am EDT

Registration / Check-In for Attendees
Tuesday July 22, 2025 8:00am - 2:30pm EDT
Tuesday July 22, 2025 8:00am - 2:30pm EDT
  Exhibit Hall

8:00am EDT

Exhibit Hall Open for Vendors
Tuesday July 22, 2025 8:00am - 6:00pm EDT
Grand Ballroom 4-7
Tuesday July 22, 2025 8:00am - 6:00pm EDT
Grand Ballroom 4-7
  Exhibit Hall

8:30am EDT

Keynote
Tuesday July 22, 2025 8:30am - 9:15am EDT
Paradise Ballroom A, B, C
Tuesday July 22, 2025 8:30am - 9:15am EDT
Paradise Ballroom A, B, C
  General Sessions

9:00am EDT

ECM Certification Training
Tuesday July 22, 2025 9:00am - 12:00pm EDT
Treasures CD
CMS Certification Review at CMSC

A two day condensed Preparatory Course designed to assist and inform students in the topics covered within the Coordinate Measurement Society’s (CMS) Level-One Certification for 3D Metrology. The course consists primarily of class discussion spurred by a Power Point presentation. Question and answer sessions will take place during the course to ensure knowledge and understanding.

Class takes place 9-3 on Tuesday and Wednesday. Exams are offered on Thursday.
If you intend to take the Certification Exam after the class, you must apply for the Exam via the normal CMS webpage, Professional Certification for Metrologists (cmsc.org). You are urged to begin the acceptance process as early as possible. Additional costs apply for exam registration.

The course reviews the test’s five broad areas of knowledge.
· Interpreting engineering documents.
· Measurement Device knowledge.
· Measurement Planning.
· Measurement Operations.
· Data Analysis and Ethics

Aims & Objectives
Encourage best practices through discussion and example questions
Improve test performance
· Describe test and conditions
· Freshen knowledge of subjects student doesn’t use on a daily basis
· Identify and address gaps in knowledge
· Review GD&T, SPC, and uncertainty
· Review documentation and planning

CMSC Committee
avatar for Thomas Kinnare

Thomas Kinnare

CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level.As a Principal Engineer at ECM... Read More →
2025 Exhibitors
avatar for ECM: A Division of In-PlaceMachine Company

ECM: A Division of In-PlaceMachine Company

ECM Global Measurement Sloutions
East Coast Metrology (Recognized as ECM–Global Measurement Solutions) provides an unparalleled standard of quality in the field of measurement. This quality of service acts as the very foundation that ECM is built on. Our years of measuring, leveling, and aligning has allowed for... Read More →

Tuesday July 22, 2025 9:00am - 12:00pm EDT
Treasures CD
  Training

9:15am EDT

To Be Announced
Tuesday July 22, 2025 9:15am - 9:45am EDT
Paradise Ballroom A, B, C
Tuesday July 22, 2025 9:15am - 9:45am EDT
Paradise Ballroom A, B, C
  Presentation

9:45am EDT

To Be Announced LIMITED
Tuesday July 22, 2025 9:45am - 10:15am EDT
Paradise Ballroom A, B, C


Tuesday July 22, 2025 9:45am - 10:15am EDT
Paradise Ballroom A, B, C
  Presentation

10:30am EDT

To Be Announced LIMITED
Tuesday July 22, 2025 10:30am - 11:00am EDT
Paradise Ballroom A, B, C
Tuesday July 22, 2025 10:30am - 11:00am EDT
Paradise Ballroom A, B, C
  Presentation

11:00am EDT

To Be Announced LIMITED
Tuesday July 22, 2025 11:00am - 11:30am EDT
Paradise Ballroom A, B, C
Tuesday July 22, 2025 11:00am - 11:30am EDT
Paradise Ballroom A, B, C
  Presentation

11:30am EDT

To Be Announced LIMITED
Tuesday July 22, 2025 11:30am - 12:00pm EDT
Paradise Ballroom A, B, C
Tuesday July 22, 2025 11:30am - 12:00pm EDT
Paradise Ballroom A, B, C
  Presentation

12:00pm EDT

Lunch LIMITED
Tuesday July 22, 2025 12:00pm - 1:30pm EDT
Grand Ballroom 1-3
Tuesday July 22, 2025 12:00pm - 1:30pm EDT
Grand Ballroom 1-3
  Meals / Breaks / Receptions

12:00pm EDT

Women in Metrology LIMITED
Tuesday July 22, 2025 12:00pm - 2:00pm EDT
Emerald B
CMSC Committee
avatar for Coordinate Metrology Society

Coordinate Metrology Society

Coordinate Metrology Society

Tuesday July 22, 2025 12:00pm - 2:00pm EDT
Emerald B
  General Sessions

12:30pm EDT

Exhibit Hall Open for Attendees LIMITED
Tuesday July 22, 2025 12:30pm - 5:30pm EDT
Grand Ballroom 4-7

Tuesday July 22, 2025 12:30pm - 5:30pm EDT
Grand Ballroom 4-7
  Exhibit Hall

1:00pm EDT

ECM Certification Training
Tuesday July 22, 2025 1:00pm - 3:00pm EDT
Treasures CD
CMS Certification Review at CMSC

A two day condensed Preparatory Course designed to assist and inform students in the topics covered within the Coordinate Measurement Society’s (CMS) Level-One Certification for 3D Metrology. The course consists primarily of class discussion spurred by a Power Point presentation. Question and answer sessions will take place during the course to ensure knowledge and understanding.

Class takes place 9-3 on Tuesday and Wednesday. Exams are offered on Thursday.
If you intend to take the Certification Exam after the class, you must apply for the Exam via the normal CMS webpage, Professional Certification for Metrologists (cmsc.org). You are urged to begin the acceptance process as early as possible. Additional costs apply for exam registration.

The course reviews the test’s five broad areas of knowledge.
· Interpreting engineering documents.
· Measurement Device knowledge.
· Measurement Planning.
· Measurement Operations.
· Data Analysis and Ethics

Aims & Objectives
Encourage best practices through discussion and example questions
Improve test performance
· Describe test and conditions
· Freshen knowledge of subjects student doesn’t use on a daily basis
· Identify and address gaps in knowledge
· Review GD&T, SPC, and uncertainty
· Review documentation and planning
CMSC Committee
avatar for Thomas Kinnare

Thomas Kinnare

CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level.As a Principal Engineer at ECM... Read More →
2025 Exhibitors
avatar for ECM: A Division of In-PlaceMachine Company

ECM: A Division of In-PlaceMachine Company

ECM Global Measurement Sloutions
East Coast Metrology (Recognized as ECM–Global Measurement Solutions) provides an unparalleled standard of quality in the field of measurement. This quality of service acts as the very foundation that ECM is built on. Our years of measuring, leveling, and aligning has allowed for... Read More →

Tuesday July 22, 2025 1:00pm - 3:00pm EDT
Treasures CD
  Training

1:30pm EDT

Metrology Jeopardy Quiz Show LIMITED
Tuesday July 22, 2025 1:30pm - 2:30pm EDT
Education Zone
Tuesday July 22, 2025 1:30pm - 2:30pm EDT
Education Zone
  Measurement / Education Zone

2:30pm EDT

Afternoon Break
Tuesday July 22, 2025 2:30pm - 3:30pm EDT
Hubbs Metrology Booth 306 in the Exhibit Hall
Sponsors
avatar for HUBBS Metrology Solutions

HUBBS Metrology Solutions

Hubbs Metrology Solutions
Hubbs Machine is the oldest and most trusted source for three dimensional close- tolerance industrial survey targeting, adapters, and supportive accessories. Success is options! Our recognized product line provides the widest range of product options supporting close-range industrial... Read More →

Tuesday July 22, 2025 2:30pm - 3:30pm EDT
Hubbs Metrology Booth 306 in the Exhibit Hall
  Meals / Breaks / Receptions

2:30pm EDT

Laser Tracker Mirror Measurement Demo - Autocollimation
Tuesday July 22, 2025 2:30pm - 3:30pm EDT
Education Zone
The main attraction of the Zone is the ever-popular Metrology Jeopardy Quiz Show hosted by Bob Elliott. This test-your-knowledge game is based upon the CMS Level-One Certification program and its core body of knowledge. During the CMS Quiz Show, participants will first compete in heats, and each winning team will stand off in a grand finale game to claim the title of 2023 CMSC Champions. All attendees are invited to engage in this fun and interactive platform to test their metrology chops.
We will be hosting 3 Sessions of Metrology Jeopardy on Tuesday and Wednesday with the Final Metrology Jeopardy event being held late Wednesday afternoon. This Final Jeopardy round will be comprised of the winners from the first three sessions. All participants will get a ticket toward a grand prize to be given out at the Wednesday night Banquet. Winners of each round will get additional tickets toward the grand prize.
Tuesday July 22, 2025 2:30pm - 3:30pm EDT
Education Zone
  Measurement / Education Zone

3:00pm EDT

To Be Announced
Tuesday July 22, 2025 3:00pm - 4:00pm EDT
Measurement Zone
Tuesday July 22, 2025 3:00pm - 4:00pm EDT
Measurement Zone
  Measurement / Education Zone

3:30pm EDT

Spotlight on new technology - AST600
Tuesday July 22, 2025 3:30pm - 4:30pm EDT
Education Zone
Tuesday July 22, 2025 3:30pm - 4:30pm EDT
Education Zone
  Measurement / Education Zone

4:30pm EDT

Metrology Jeopardy Quiz Show
Tuesday July 22, 2025 4:30pm - 5:30pm EDT
Education Zone
The main attraction of the Zone is the ever-popular Metrology Jeopardy Quiz Show hosted by Bob Elliott. This test-your-knowledge game is based upon the CMS Level-One Certification program and its core body of knowledge. During the CMS Quiz Show, participants will first compete in heats, and each winning team will stand off in a grand finale game to claim the title of 2023 CMSC Champions. All attendees are invited to engage in this fun and interactive platform to test their metrology chops.
We will be hosting 3 Sessions of Metrology Jeopardy on Tuesday and Wednesday with the Final Metrology Jeopardy event being held late Wednesday afternoon. This Final Jeopardy round will be comprised of the winners from the first three sessions. All participants will get a ticket toward a grand prize to be given out at the Wednesday night Banquet. Winners of each round will get additional tickets toward the grand prize.
Tuesday July 22, 2025 4:30pm - 5:30pm EDT
Education Zone
  Measurement / Education Zone

5:00pm EDT

GSI User Group Meeting
Tuesday July 22, 2025 5:00pm - 7:00pm EDT
Emerald B
2025 Exhibitors
avatar for Geodetic Systems Inc.

Geodetic Systems Inc.

Geodetic Systems Inc. is the leading global supplier of industrial photogrammetry solutions in the portable metrology marketplace. GSI develops and markets the V-STARS family of 3D coordinate measurement systems for users involved in the measurement and inspection of applications... Read More →

Tuesday July 22, 2025 5:00pm - 7:00pm EDT
Emerald B
  Invitation Only
 
Wednesday, July 23
 

6:00am EDT

CMS 5K Fun Run
Wednesday July 23, 2025 6:00am - 8:00am EDT
TBA
Please Meet at the the Embassy Suites parking lot at the Hector H Henry Greenway Entrance.
CMSC Committee
avatar for Coordinate Metrology Society

Coordinate Metrology Society

Coordinate Metrology Society
Wednesday July 23, 2025 6:00am - 8:00am EDT
TBA
  General Sessions

6:30am EDT

Breakfast
Wednesday July 23, 2025 6:30am - 8:30am EDT
Hotel Lobby Area
Wednesday July 23, 2025 6:30am - 8:30am EDT
Hotel Lobby Area
  Meals / Breaks / Receptions

8:00am EDT

Registration / Check-In for Attendees LIMITED
Wednesday July 23, 2025 8:00am - 4:00pm EDT
Wednesday July 23, 2025 8:00am - 4:00pm EDT
  Exhibit Hall

8:00am EDT

Exhibit Hall Open for Vendors
Wednesday July 23, 2025 8:00am - 6:00pm EDT
Grand Ballroom 4-7
Wednesday July 23, 2025 8:00am - 6:00pm EDT
Grand Ballroom 4-7
  Exhibit Hall

8:15am EDT

Conference Updates
Wednesday July 23, 2025 8:15am - 8:30am EDT
Paradise Ballroom A, B, C
CMSC Committee
avatar for Justin Novak

Justin Novak

Executive Committee Chair, Newport News Shipbuilding
Justin Novak is a Supervisor at Newport News Shipbuilding, where he has been active in the Metrology field for 14 years. He graduated from the NNS Apprentice School in 2008, earning the Charles F Bailey Award for academic excellence, and received an Associate’s Degree in Mechanical... Read More →
Wednesday July 23, 2025 8:15am - 8:30am EDT
Paradise Ballroom A, B, C
  General Sessions

8:30am EDT

Keynote LIMITED
Wednesday July 23, 2025 8:30am - 9:15am EDT
Paradise Ballroom A, B, C
Wednesday July 23, 2025 8:30am - 9:15am EDT
Paradise Ballroom A, B, C
  General Sessions

9:00am EDT

ECM Certification Training LIMITED
Wednesday July 23, 2025 9:00am - 12:00pm EDT
Treasures CD
CMS Certification Review at CMSC

A two day condensed Preparatory Course designed to assist and inform students in the topics covered within the Coordinate Measurement Society’s (CMS) Level-One Certification for 3D Metrology. The course consists primarily of class discussion spurred by a Power Point presentation. Question and answer sessions will take place during the course to ensure knowledge and understanding.

Class takes place 9-3 on Tuesday and Wednesday. Exams are offered on Thursday.
If you intend to take the Certification Exam after the class, you must apply for the Exam via the normal CMS webpage, Professional Certification for Metrologists (cmsc.org). You are urged to begin the acceptance process as early as possible. Additional costs apply for exam registration.

The course reviews the test’s five broad areas of knowledge.
· Interpreting engineering documents.
· Measurement Device knowledge.
· Measurement Planning.
· Measurement Operations.
· Data Analysis and Ethics

Aims & Objectives
Encourage best practices through discussion and example questions
Improve test performance
· Describe test and conditions
· Freshen knowledge of subjects student doesn’t use on a daily basis
· Identify and address gaps in knowledge
· Review GD&T, SPC, and uncertainty
· Review documentation and planning
CMSC Committee
avatar for Thomas Kinnare

Thomas Kinnare

CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level.As a Principal Engineer at ECM... Read More →
2025 Exhibitors
avatar for ECM: A Division of In-PlaceMachine Company

ECM: A Division of In-PlaceMachine Company

ECM Global Measurement Sloutions
East Coast Metrology (Recognized as ECM–Global Measurement Solutions) provides an unparalleled standard of quality in the field of measurement. This quality of service acts as the very foundation that ECM is built on. Our years of measuring, leveling, and aligning has allowed for... Read More →

Wednesday July 23, 2025 9:00am - 12:00pm EDT
Treasures CD
  Training

9:15am EDT

To Be Announced LIMITED
Wednesday July 23, 2025 9:15am - 9:45am EDT
Paradise Ballroom A, B, C
Wednesday July 23, 2025 9:15am - 9:45am EDT
Paradise Ballroom A, B, C
  Presentation

9:45am EDT

To Be Announced LIMITED
Wednesday July 23, 2025 9:45am - 10:15am EDT
Paradise Ballroom A, B, C
Wednesday July 23, 2025 9:45am - 10:15am EDT
Paradise Ballroom A, B, C
  Presentation

9:45am EDT

Morning Coffee Break LIMITED
Wednesday July 23, 2025 9:45am - 10:45am EDT
Paradise Ballroom A, B, C
Sponsors
avatar for Boeing
Wednesday July 23, 2025 9:45am - 10:45am EDT
Paradise Ballroom A, B, C
  Meals / Breaks / Receptions

11:00am EDT

To Be Announced
Wednesday July 23, 2025 11:00am - 11:30am EDT
Paradise Ballroom A, B, C
Wednesday July 23, 2025 11:00am - 11:30am EDT
Paradise Ballroom A, B, C
  Presentation

11:30am EDT

To Be Announced LIMITED
Wednesday July 23, 2025 11:30am - 12:00pm EDT
Paradise Ballroom A, B, C
Wednesday July 23, 2025 11:30am - 12:00pm EDT
Paradise Ballroom A, B, C
  Presentation

12:00pm EDT

To Be Announced LIMITED
Wednesday July 23, 2025 12:00pm - 12:30pm EDT
Paradise Ballroom A, B, C
Wednesday July 23, 2025 12:00pm - 12:30pm EDT
Paradise Ballroom A, B, C
  Presentation

12:00pm EDT

Lunch LIMITED
Wednesday July 23, 2025 12:00pm - 1:30pm EDT
Grand Ballroom 1-3
Sponsors
avatar for Geodetic Systems Inc.

Geodetic Systems Inc.

Geodetic Systems Inc. is the leading global supplier of industrial photogrammetry solutions in the portable metrology marketplace. GSI develops and markets the V-STARS family of 3D coordinate measurement systems for users involved in the measurement and inspection of applications... Read More →
Wednesday July 23, 2025 12:00pm - 1:30pm EDT
Grand Ballroom 1-3
  Meals / Breaks / Receptions

12:30pm EDT

Exhibit Hall Open for Attendees LIMITED
Wednesday July 23, 2025 12:30pm - 5:30pm EDT
Grand Ballroom 4-7

Wednesday July 23, 2025 12:30pm - 5:30pm EDT
Grand Ballroom 4-7
  Exhibit Hall

1:00pm EDT

ECM Certification Training
Wednesday July 23, 2025 1:00pm - 3:00pm EDT
Treasures CD
CMS Certification Review at CMSC

A two day condensed Preparatory Course designed to assist and inform students in the topics covered within the Coordinate Measurement Society’s (CMS) Level-One Certification for 3D Metrology. The course consists primarily of class discussion spurred by a Power Point presentation. Question and answer sessions will take place during the course to ensure knowledge and understanding.

Class takes place 9-3 on Tuesday and Wednesday. Exams are offered on Thursday.
If you intend to take the Certification Exam after the class, you must apply for the Exam via the normal CMS webpage, Professional Certification for Metrologists (cmsc.org). You are urged to begin the acceptance process as early as possible. Additional costs apply for exam registration.

The course reviews the test’s five broad areas of knowledge.
· Interpreting engineering documents.
· Measurement Device knowledge.
· Measurement Planning.
· Measurement Operations.
· Data Analysis and Ethics

Aims & Objectives
Encourage best practices through discussion and example questions
Improve test performance
· Describe test and conditions
· Freshen knowledge of subjects student doesn’t use on a daily basis
· Identify and address gaps in knowledge
· Review GD&T, SPC, and uncertainty
· Review documentation and planning

CMSC Committee
avatar for Thomas Kinnare

Thomas Kinnare

CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level.As a Principal Engineer at ECM... Read More →
2025 Exhibitors
avatar for ECM: A Division of In-PlaceMachine Company

ECM: A Division of In-PlaceMachine Company

ECM Global Measurement Sloutions
East Coast Metrology (Recognized as ECM–Global Measurement Solutions) provides an unparalleled standard of quality in the field of measurement. This quality of service acts as the very foundation that ECM is built on. Our years of measuring, leveling, and aligning has allowed for... Read More →

Wednesday July 23, 2025 1:00pm - 3:00pm EDT
Treasures CD
  Training

1:30pm EDT

Metrology Jeopardy Quiz Show LIMITED
Wednesday July 23, 2025 1:30pm - 2:30pm EDT
Education Zone
The main attraction of the Zone is the ever-popular Metrology Jeopardy Quiz Show hosted by Bob Elliott. This test-your-knowledge game is based upon the CMS Level-One Certification program and its core body of knowledge. During the CMS Quiz Show, participants will first compete in heats, and each winning team will stand off in a grand finale game to claim the title of 2023 CMSC Champions. All attendees are invited to engage in this fun and interactive platform to test their metrology chops.
We will be hosting 3 Sessions of Metrology Jeopardy on Tuesday and Wednesday with the Final Metrology Jeopardy event being held late Wednesday afternoon. This Final Jeopardy round will be comprised of the winners from the first three sessions. All participants will get a ticket toward a grand prize to be given out at the Wednesday night Banquet. Winners of each round will get additional tickets toward the grand prize.
Wednesday July 23, 2025 1:30pm - 2:30pm EDT
Education Zone
  Measurement / Education Zone

2:30pm EDT

Afternoon Break
Wednesday July 23, 2025 2:30pm - 3:30pm EDT
Hubbs Metrology Booth 306 in the Exhibit Hall
Sponsors
avatar for HUBBS Metrology Solutions

HUBBS Metrology Solutions

Hubbs Metrology Solutions
Hubbs Machine is the oldest and most trusted source for three dimensional close- tolerance industrial survey targeting, adapters, and supportive accessories. Success is options! Our recognized product line provides the widest range of product options supporting close-range industrial... Read More →
Wednesday July 23, 2025 2:30pm - 3:30pm EDT
Hubbs Metrology Booth 306 in the Exhibit Hall
  Meals / Breaks / Receptions

2:30pm EDT

Laser Tracker Mirror Measurement Demo - 2 Shot Method
Wednesday July 23, 2025 2:30pm - 3:30pm EDT
Education Zone
Experienced Metrology professionals discuss unique alignment and measurement techniques used throughout the manufacturing of seafaring vessels.
Wednesday July 23, 2025 2:30pm - 3:30pm EDT
Education Zone
  Measurement / Education Zone

3:00pm EDT

To Be Announced
Wednesday July 23, 2025 3:00pm - 4:00pm EDT
Measurement Zone
Wednesday July 23, 2025 3:00pm - 4:00pm EDT
Measurement Zone
  Measurement / Education Zone

3:30pm EDT

GD&T Discussion/Q&A
Wednesday July 23, 2025 3:30pm - 4:30pm EDT
Education Zone
CMSC Committee
avatar for Rina Molari-Korgel

Rina Molari-Korgel

EXECUTIVE COMMITTEE TREASURER
Rina Molari-Korgel has been involved with portable industrial metrology since 1983, after graduating with a Bachelor of Engineering in Surveying and Photogrammetry from California State University at Fresno.  Her aerospace experience with General Dynamics and Lockheed Martin introduced... Read More →
Wednesday July 23, 2025 3:30pm - 4:30pm EDT
Education Zone
  Measurement / Education Zone

4:30pm EDT

Final Metrology Jeopardy Quiz Show
Wednesday July 23, 2025 4:30pm - 5:30pm EDT
Education Zone
The main attraction of the Zone is the ever-popular Metrology Jeopardy Quiz Show hosted by Bob Elliott. This test-your-knowledge game is based upon the CMS Level-One Certification program and its core body of knowledge. During the CMS Quiz Show, participants will first compete in heats, and each winning team will stand off in a grand finale game to claim the title of 2023 CMSC Champions. All attendees are invited to engage in this fun and interactive platform to test their metrology chops.
We will be hosting 3 Sessions of Metrology Jeopardy on Tuesday and Wednesday with the Final Metrology Jeopardy event being held late Wednesday afternoon. This Final Jeopardy round will be comprised of the winners from the first three sessions. All participants will get a ticket toward a grand prize to be given out at the Wednesday night Banquet. Winners of each round will get additional tickets toward the grand prize.
Wednesday July 23, 2025 4:30pm - 5:30pm EDT
Education Zone
  Measurement / Education Zone

6:00pm EDT

CMSC Honors and Awards Social Gathering
Wednesday July 23, 2025 6:00pm - 8:00pm EDT

Wednesday July 23, 2025 6:00pm - 8:00pm EDT
  Meals / Breaks / Receptions
 
Thursday, July 24
 

6:30am EDT

Breakfast LIMITED
Thursday July 24, 2025 6:30am - 8:30am EDT
Hotel Lobby Area
Thursday July 24, 2025 6:30am - 8:30am EDT
Hotel Lobby Area
  Meals / Breaks / Receptions

8:00am EDT

Navy Only Meeting LIMITED
Thursday July 24, 2025 8:00am - 12:00pm EDT
Emerald C
Navy Only Meeting
Thursday July 24, 2025 8:00am - 12:00pm EDT
Emerald C
  Invitation Only

8:00am EDT

CMS Certification Exam LIMITED
Thursday July 24, 2025 8:00am - 12:00pm EDT
Treasures CD
CMSC Committee
avatar for Thomas Kinnare

Thomas Kinnare

CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level.As a Principal Engineer at ECM... Read More →
Thursday July 24, 2025 8:00am - 12:00pm EDT
Treasures CD
  Training

8:00am EDT

Registration / Check-In for Attendees LIMITED
Thursday July 24, 2025 8:00am - 3:00pm EDT
Thursday July 24, 2025 8:00am - 3:00pm EDT
  Exhibit Hall

8:00am EDT

Exhibit Hall Open for Vendors
Thursday July 24, 2025 8:00am - 6:00pm EDT
Grand Ballroom 4-7
Thursday July 24, 2025 8:00am - 6:00pm EDT
Grand Ballroom 4-7
  Exhibit Hall

8:15am EDT

Conference Updates
Thursday July 24, 2025 8:15am - 8:30am EDT
Paradise Ballroom A, B, C
CMSC Committee
avatar for Bob Elliott

Bob Elliott

Executive Committee Vice Chair
Bob Elliott is a senior staff test engineer in the Precision Alignment Lab (PAL) for Lockheed Martin Space Systems in Sunnyvale, CA. As a member of PAL for 20 years Bob has had opportunities to solve many diverse metrology challenges on complex spacecraft. In 2011 Bob led the PAL... Read More →
avatar for Justin Novak

Justin Novak

Executive Committee Chair, Newport News Shipbuilding
Justin Novak is a Supervisor at Newport News Shipbuilding, where he has been active in the Metrology field for 14 years. He graduated from the NNS Apprentice School in 2008, earning the Charles F Bailey Award for academic excellence, and received an Associate’s Degree in Mechanical... Read More →
Thursday July 24, 2025 8:15am - 8:30am EDT
Paradise Ballroom A, B, C
  General Sessions

8:30am EDT

Keynote LIMITED
Thursday July 24, 2025 8:30am - 9:15am EDT
Paradise Ballroom A, B, C
Thursday July 24, 2025 8:30am - 9:15am EDT
Paradise Ballroom A, B, C
  General Sessions

9:45am EDT

To Be Announced LIMITED
Thursday July 24, 2025 9:45am - 10:15am EDT
Paradise Ballroom A, B, C
Thursday July 24, 2025 9:45am - 10:15am EDT
Paradise Ballroom A, B, C
  Presentation

9:45am EDT

Morning Coffee Break LIMITED
Thursday July 24, 2025 9:45am - 10:45am EDT
Paradise Ballroom A, B, C
Sponsors
avatar for Boeing
Thursday July 24, 2025 9:45am - 10:45am EDT
Paradise Ballroom A, B, C
  Meals / Breaks / Receptions

10:30am EDT

To Be Announced
Thursday July 24, 2025 10:30am - 11:00am EDT
Paradise Ballroom A, B, C
Thursday July 24, 2025 10:30am - 11:00am EDT
Paradise Ballroom A, B, C
  Presentation

11:00am EDT

To Be Announced LIMITED
Thursday July 24, 2025 11:00am - 11:30am EDT
Paradise Ballroom A, B, C
Thursday July 24, 2025 11:00am - 11:30am EDT
Paradise Ballroom A, B, C
  Presentation

11:30am EDT

To Be Announced LIMITED
Thursday July 24, 2025 11:30am - 12:00pm EDT
Paradise Ballroom A, B, C
Thursday July 24, 2025 11:30am - 12:00pm EDT
Paradise Ballroom A, B, C
  Presentation

12:00pm EDT

Lunch LIMITED
Thursday July 24, 2025 12:00pm - 1:30pm EDT
Grand Ballroom 1-3
Thursday July 24, 2025 12:00pm - 1:30pm EDT
Grand Ballroom 1-3
  Meals / Breaks / Receptions

12:30pm EDT

Exhibit Hall Open for Attendees LIMITED
Thursday July 24, 2025 12:30pm - 5:30pm EDT
Grand Ballroom 4-7

Thursday July 24, 2025 12:30pm - 5:30pm EDT
Grand Ballroom 4-7
  Exhibit Hall

1:00pm EDT

CMS Certification Exam
Thursday July 24, 2025 1:00pm - 5:00pm EDT
Treasures CD
CMSC Committee
avatar for Thomas Kinnare

Thomas Kinnare

CMS Certification Chairman, ECM Global Measurement Solutions
After rolling like a bad penny across a wide range of industries for 15 years, Tom landed at East Coast Metrology (ECM), where he has spent nearly 20 fruitful years laboring to bestow the blessings of dimensional metrology on clients at a global level.As a Principal Engineer at ECM... Read More →
Thursday July 24, 2025 1:00pm - 5:00pm EDT
Treasures CD
  Training

1:30pm EDT

CMS Education Committee Report LIMITED
Thursday July 24, 2025 1:30pm - 2:00pm EDT
Education Zone
Experienced Metrology professionals discuss challenges faced in Metrology applications for ship repair.
Thursday July 24, 2025 1:30pm - 2:00pm EDT
Education Zone
  Measurement / Education Zone

2:00pm EDT

To Be Announced
Thursday July 24, 2025 2:00pm - 2:30pm EDT
Education Zone
Thursday July 24, 2025 2:00pm - 2:30pm EDT
Education Zone
  Measurement / Education Zone

2:00pm EDT

Ask the Experts
Thursday July 24, 2025 2:00pm - 3:00pm EDT
Education Zone
Speakers
avatar for Gary Confalone

Gary Confalone

Founder, ECM Global Measurement Sloutions
Gary Confalone has been working in the metrology industry for the past 30 years. He began his career in Systems Integration as an Engineer at Sikorsky Aircraft. At Sikorsky Gary was an active member of the American Helicopter Society, where he was involved in laser metrology research... Read More →
Thursday July 24, 2025 2:00pm - 3:00pm EDT
Education Zone
  Measurement / Education Zone

2:30pm EDT

Afternoon Break
Thursday July 24, 2025 2:30pm - 3:30pm EDT
Hubbs Metrology Booth 306 in the Exhibit Hall
Sponsors
avatar for HUBBS Metrology Solutions

HUBBS Metrology Solutions

Hubbs Metrology Solutions
Hubbs Machine is the oldest and most trusted source for three dimensional close- tolerance industrial survey targeting, adapters, and supportive accessories. Success is options! Our recognized product line provides the widest range of product options supporting close-range industrial... Read More →
Thursday July 24, 2025 2:30pm - 3:30pm EDT
Hubbs Metrology Booth 306 in the Exhibit Hall
  Meals / Breaks / Receptions

3:00pm EDT

Automation Panel Discussion/Q&A
Thursday July 24, 2025 3:00pm - 4:00pm EDT
Education Zone
Thursday July 24, 2025 3:00pm - 4:00pm EDT
Education Zone
  Measurement / Education Zone

4:00pm EDT

CMS All-Member & Exhibitor Happy Hour and Feedback Session
Thursday July 24, 2025 4:00pm - 5:00pm EDT
Education Zone
Thursday July 24, 2025 4:00pm - 5:00pm EDT
Education Zone
  Measurement / Education Zone

5:30pm EDT

Exhibit Hall Teardown
Thursday July 24, 2025 5:30pm - 9:00pm EDT
Grand Ballroom 4-7
​Conference Center Exhibitor Order Form ​​​
Thursday July 24, 2025 5:30pm - 9:00pm EDT
Grand Ballroom 4-7
  Exhibit Hall
 
Friday, July 25
 

8:00am EDT

CMSC Friday Tour
Friday July 25, 2025 8:00am - 11:00am EDT
TBA
FEEL THE THRILL SPEEDWAY TOUR!Visit the NASCAR Cup Series garage area and take a ride through two infield race tracks. After you make your way down Pit Road, stop in Winner’s Circle for a photo opportunity. Learn the history of Charlotte Motor Speedway while enjoying a comfortable van ride around the Superspeedway where you will feel the full-tilt force of the 24-degree banking. Plus, visit zMAX Dragway and The Dirt Track at Charlotte on this exciting tour! Reserve your seat by calling 704-455-3223 or visit the Tour Desk on the second floor of Smith Tower.

  • Tours operate rain or shine, so please plan accordingly.
  • Departure Location: Convention entrance by your South Registration Desk, please arrive 15 minutes early to check in
  • Dress Code: Comfortable clothing for outdoors and air conditioned van, comfortable shoes for walking, sunscreen, sunglasses

* All tour participants under 18 years old must have a parental waiver signed for them. Please call tour desk for details [704-455-3223]


Friday July 25, 2025 8:00am - 11:00am EDT
TBA
  General Sessions
 
Share Modal

Share this link via

Or copy link

Filter sessions
Apply filters to sessions.
Monday, July 21
Tuesday, July 22
Wednesday, July 23
Thursday, July 24
Friday, July 25
Education Zone
Emerald B
Emerald C
Grand Ballroom 1-3
Grand Ballroom 4-7
Hotel Lobby Area
Hubbs Metrology Booth 306 in the Exhibit Hall
Measurement Zone
Paradise Ballroom A, B, C
Paradise D
TBA
Treasures CD
  • Exhibit Hall
  • General Sessions
  • Invitation Only
  • Meals / Breaks / Receptions
  • Measurement / Education Zone
  • Presentation
  • Training